12 EVOLUTION 1 SYSTEM MANUAL Issue Issue 1.1 20 Dec 2006
As a comparison the following is a scanned image of the actual printed sample.
The above is an enlarged pictorial of the last 3 element resolutions. As may be
seen the 2x2 element is extremely discernable, where the 1x1 array loses
definition due to bleed patterns.
As with linear barcodes the use of an encoder is not necessary for 2-D barcodes
for any environment that does not contain an acceleration or deceleration
component. Product handling should always be considered and care should be
exercised in presenting the product relative to the print head in a consistent
manner.
IDEAL
1X1
ELEMENT
WITHOUT
To Next Page
Loading...