Digital Design EVOLUTION II - Time Format

18 EVOLUTION 1 SYSTEM MANUAL Issue 1.1 20 Dec 2006
4 – TIME FORMAT:
Change the Time Format by selecting option 4.
NOTE: Delimiter characters like a :
code may be entered to separate fields
The factory default for time formatting is hh:mm
and may be changed as required. Press the
Delete key and the last line on the display is
erased.
Enter the desired format by pressing the H and or
M keys, and select delimiters as required. Select
H if only hours are required.
Press the Enter key to return to the STOPPED
mode.
1= NOT AVAILABLE
2= NOT AVAILABLE
3=DATE FORMAT
4=TIME FORMAT
TIME FORMAT
H=HOURS
M=MINUTES
hh:mm
TIME FORMAT
H=HOURS
M=MINUTES
hh