Digital Design EVOLUTION II - Entering a Message

16 EVOLUTION 1 SYSTEM MANUAL Issue 1.1 20 Dec 2006
ENTERING A MESSAGE
Press the GREEN PRINT key
The LCD display will change from PRINTING to
STOPPED.
Press the GREEN EDIT key
Press the BLUE F3 key to delete the entire
message
Press the BLUE FONT key to select
the desired font size and enter the text EXP
12/10/04
Press the ENTER key to end the MESSAGE
EDIT mode
Notice as data is entered the display scrolls to the
left as new characters are entered.
Press the ENTER key
will end the MESSAGE
EDIT mode, re-display the message end enter the
STOPPED mode.
Press the GREEN print enable key to enter
the print mode
EV2 STOPPED
HD 1- - >SPEED=100
EVOLU
MESSAGE ENTRY
- - - - FONT-1 LINE
EVOLU
MESSAGE ENTRY
- - - - FONT-1 LINE
MESSAGE ENTRY
- - - - FONT-1 LINE
EXP 12/
MESSAGE ENTRY
- - - - FONT-1 LINE
2/10/04
EV2 PRINTING
HD 1- - >SPEED=100
EXP 12/