1 EVOLUTION 1 SYSTEM MANUAL Issue Issue 1.1 20 Dec 2006
PART 8: SPECIFICATIONS
PRINTER SPECIFICATIONS
PRINT CHARACTERISTICS
Character Set: Full alphanumeric and 20 special symbols
Standard Font: Arial style
Logos: up to 3 resident
Line Speeds: From 10 to 200 fpm
Encoder Ratio: 0 to 7
Print Delay: From 1 to 255 (approx .060 in to 15.0 in)
Character Heights:
1/2” single line of print
7/32” two lines of print
Length: 24 characters (1/2”) 48 characters (7/32”)
Message Storage 50 Messages
Print Head to Product Distance: Up to 1/4" (6.35 mm)
CONTROLLER
Standard Finish: Hi Impact ABS Black
Dimensions: 8.75"H x 4.25"W x 2.7"D (222 mm x 108 mm x 69
mm)
Weight: 1 lbs. (4.5 kg)
Control Panel: Touch Switches and 4x16 Line LCD
PRINT CARRIAGE
Standard Finish: Aluminum Black Anodized
Dimensions: 3.0"H x 1.8"W x 4.0"D (76 mm x 46 mm x 102 mm)
Weight: 1 lbs. (4.5 kg)
ENVIRONMENTAL CONDITIONS
Temperature Range: 40°F - 104°F (5°C - 40°C)
Humidity: up to 90% relative, non-condensing
Electrical Supply: 100-250 VAC; 50-60 Hz; 0.25Amp
GENERAL
Product Detector: IR LED convergent
Communications link RS485 (115KBAUD 7-BITS EVEN PARITY 1 STOP
BIT)
To Next Page
Loading...