EasyManua.ls Logo

Digital Design EVOLUTION II - Commands

Digital Design EVOLUTION II
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 EVOLUTION 1 SYSTEM MANUAL Issue Issue 1.1 20 Dec 2006
COMMANDS:
'!' 0x21 Software Version (read only)
(EV I, EV II, EV SC)
Q. ESC|STX|Address|`!`|SOH|EOT
R. ESC|STX|Address|{PRINTER fffffssss}|CR|EOT
Where:
PRINTER= ASCII string PRINTER for EVOLUTION I
EV2 for EVOLUTION II
EVSC for EVOLUTION SC
fffff = Software and Firmware versions
(eg. 2.02H indicates version 2.02 with Firmware version H)
ssss = Optional Software loaded
Where: (for EV I only)
The first y indicates option pack 1
The second y indicates option pack 2
The third y indicates option pack 1.5
The last y is reserved for future expansion
Where: (for EV II and EV SC)
Both units are standard with all options thus a ++++ will be
returned
'#' 0x23 Printer Configuration (Read only)
(EV I, EV II, EV SC)
Q. ESC|STX|Address|`#`|SOH|EOT
R. ESC|STX|Address|`#`|`x`|`y`|EOT
Where Byte x Bits 3,2,1,0
Bit 3 = if 1 Cartridge Not Valid
Bit 2 = Not Used
Bits 1,0 = System Type
11 = Evolution 1
10 = Evolution 2
01 = Evolution 3
00 = Evolution Small Character
Where Byte y Bits 3,2,1,0
0000 = no options available
0001 = option1 enabled
0010 = option2 enabled
0100 = option3 enabled
'\' 0x5c Unit Serial Number (Read only 6 digits)
(EV I, EV II, EV SC)
Q. ESC|STX|Address|`\`|SOH|EOT
R. ESC|STX|Address|`\`|`serial number`|CR|EOT

Table of Contents