14 EVOLUTION 1 SYSTEM MANUAL Issue 1.1 20 Dec 2006
F3 MENU
1 – PRODUCT COUNT:
The product counter is a non-printable entity,
and must be read after the end of the set time
period. The counter indicates each print cycle
sensed by the external photo eye. Depressing
the C key may clear the counter.
If there are no changes press the N key.
To change the settings depress the Y key.
All times are in Military Time 00:00 to 23:59
hours.
Enter the start time HOURS.
At the next screen prompt enter the start time
MINUTES
The system then prompts the user for the STOP
TIME.
Enter both the stop time HOURS and then the
MINUTES.
The newly entered data is re-displayed for
verification or correction if necessary Press the
Y key to change the data or the N key to finish
and return to the STOPPED MODE
.
PRODUCT COUNT
CHANGES Y / N OR C
08:00 - - > 17:00
COUNT = 000000
PRODUCT COUNT
START TIME
08:00 - - > 17:00
ENTER HOURS-
PRODUCT COUNT
START TIME
08:00 - - > 16:00
ENTER MINUTES-
PRODUCT COUNT
STOP TIME
08:00 - - > 16:00
ENTER HOURS-
1= PRODUCT COUNT
2= SHIFT CODE
3=DATE FORMAT
4=TIME FORMAT
PRODUCT COUNT
STOP TIME
08:00 - - > 16:00
ENTER MINUTES-
PRODUCT COUNT
CHANGES Y / N OR C
08:00 - - > 17:00
COUNT = 000000
To Next Page
Loading...