13 EVOLUTION 1 SYSTEM MANUAL Issue Issue 1.1 20 Dec 2006
USING CHECK CHARACTER:
If you are supplying the code with the check digit already calculated, you must
deselect the ADD CHECK CHARACTER.
If you want the software to calculate the checksum for you, you must select ADD
CHECK CHARACTER.
For example:
EAN and UPC have fixed length and therefore only have the following
possibilities exist.
EAN13: you supply a 13-digit code including the CHECK CHARACTER or you
supply a 12-digit code and select the ADD CHECK CHARACTER.
EAN8: you supply an 8-digit code including the CHECK CHARACTER or you
supply a 7-digit code and select ADD CHECK CHARACTER.
UPCA you supply a 12-digit code including the CHECK CHARACTER or you
supply 11-digit code and select ADD CHECK CHARACTER.
UPCE: you supply an 8-digit code including the CHECK CHARACTER or you
supply a 7-digit code and select ADD CHECK CHARACTER.
To Previous Page
Loading...