3 EVOLUTION 1 SYSTEM MANUAL Issue 1.1 20 Dec 2006
INSTALLATION AND OPERATION MANUAL 6
PART 1: INSTALLATION PROCEDURES 6
INSTALLING THE EVOLUTION II PRINTING SYSTEM 6
MOUNTING ON PRODUCTION LINE 6
EVOLUTION II MOUNTING OPTIONS 7
After the mounting bracket is configured loosen the locking collar 7A014S and re-locate it
against the horizontal extension bracket and tighten. This allows the user to loosen the
horizontal mounting bracket-locking knob and rotate the assembly without losing the height
adjustment.
8
GROUNDING STRAP INSTALLATION 9
INPUT POWER CONNECTION AND MODIFICATION 9
INSTALLING THE PRINT CARTRIDGE 10
CONNECTING THE CONTROLLER TO THE CARRIAGE 11
CONFIGURING THE PRINTER 12
SYSTEM RESET 12
MULTIPLE PRINT HEADS 14
EVOLUTION II QUICK START 15
CHANGING LANGUAGE PROMPTS 15
ENABLING PRINT MODE 15
HEAD SELECT MODE 15
ENTERING A MESSAGE 16
STORING A MESSAGE 17
LOADING A MESSAGE 18
EVOLUTION II QUICK SETUP 19
PART 2: OPERATION PROCEDURES 1
OVERVIEW CONTROLLER and LCD 1
KEYPAD KEY DESCRIPTIONS 2
TURNING ON THE PRINT STATION FOR THE FIRST TIME 3
CHECKING SYSTEM INFORMATION 3
CHECKING LOADED FONTS 3
CHANGING SYSTEM DATE AND DAY OF WEEK CODES 4
CHANGING SYSTEM TIME AND DATE ROLL OVER TIME 5
PROGRAMMING 7
DEFINITIONS 7
PRINT MODE AND STOPPED “COMMAND” MODE 7
F1 MENU 9
1 = CHARACTER SPACING: 9
2 = EXT. ENCODER: 9
3 = DATE OFFSET: 10
4 = BARCODE TYPE: 10
F2 MENU 12
1 - DIRECTION: 12
2 - PRINT INVERSE: 12
3 – PRODUCT DETECT: 12
4 - AUTO REPEAT: 13
F3 MENU 14
1 – PRODUCT COUNT: 14
2 – shift code: 15
3 – DATE FORMAT: 16
4 – TIME FORMAT: 18
F4 MENU 19
1 - LANGUAGE: 19
2 - INK SUPPLY: 19
To Next Page
Loading...