4 EVOLUTION 1 SYSTEM MANUAL Issue 1.1 20 Dec 2006
3 – SET UNIT I.D.: 20
4 – LOAD CARD: 21
SETTING PRINT DELAY AND LINE SPEED 24
SETTING LINE SPEED 24
SETTING PRINT DELAY 25
SETTING HEAD ALIGNMENT 25
INPUT, EDIT OR DELETE MESSAGES 26
VARIABLE FIELD FORMAT PRINTING 33
MESSAGE STORAGE 36
STORING A MESSAGE 36
RECALLING A STORED MESSAGE 36
PART 3: MAINTENANCE PROCEDURES 1
SHORT PERIODS OF SHUT DOWN 1
LONG PERIODS OF SHUT-DOWN 2
PRINT CARTRIDGE MAINTENANCE 3
PRINT CARRIAGE MAINTENANCE 5
EXPLODED VIEW OF THE C21002 PRINT CARRIAGE 5
PART 4: TROUBLESHOOTING AND REPAIRS 1
FAULTS 1
PART 5: PARTS LIST AND OPTIONS 1
PART 6: COMMUNICATIONS PROTOCOL 1
DESCRIPTION 2
DATA WORD DEFINITION 2
BAUD RATE 2
DEFINITIONS 2
CABLING FOR EVLINK ENVIRONMENT 2
HARDWARE INTERFACE 3
PHYSICAL CONNECTIONS RS485 print carriage 3
PROTOCOL FORMAT: 3
EVOLUTION PRINTABLE CHARACTER SET 3
SOFTWARE PROTOCOL 4
ERROR CODES 4
COMMANDS: 6
PART 7: OPTION JUMPERS AND CABLING 1
OPTION JUMPER DESCRIPTIONS 1
VSEL J7 1
ENSEL J9 1
PRSEL J10 1
JUMPER LOCATION 2
OPTION CABLING DESCRIPTIONS 3
PART 8: SPECIFICATIONS 1
PRINTER SPECIFICATIONS 1
PRINT CHARACTERISTICS 1
CONTROLLER 1
PRINT CARRIAGE 1
ENVIRONMENTAL CONDITIONS 1
GENERAL 1
DEFAULT SETTINGS 2
APPENDIX A – PRODUCING RELIABLE BAR CODES 3
BARCODE INTEGRITY - 3
CONTRACT RATIO - 3
BAR SEPARATION - 3
QUIET ZONE - 3
To Next Page
Loading...