20 EVOLUTION 1 SYSTEM MANUAL Issue 1.1 20 Dec 2006
3 – SET UNIT I.D.:
Each print carriage can contain a unique address
to distinguish multiple carriages when controlled
by a single hand held controller or computer data
link using an RS485 data link. The default for each
new print carriage module is ADDRESS 1.
Addresses can range from 1 to 32. It is advisable
when adding multiple print carriages to affix a label indicating the unique
ADDRESS number of the individual carriage.
Note: To program a carriage it must be connected directly to the
hand held controller, with no other carriages connected.
< - - SELECT - - >
SET HEAD # = 1
To Next Page
Loading...