17 EVOLUTION 1 SYSTEM MANUAL Issue 1.1 20 Dec 2006
Alpha characters may have bee selected by
pressing option 2.
Delete the current formatting by pressing the
Delete key.
Enter the desired Date Format and notice when
the M (month) is selected the display shows
mmm. Select the appropriate key on the
keyboard by entering in the desired code. Press
the Enter key to return to the STOPPED mode.
The software performs a special function
allowing the user to set the current date to
change only at a certain day of the week. This
function is typically used in batch processing,
where a batch may be prepared on Sunday and
packaged from Monday through Friday of the
following week.
Entering either the current date or offset date in a message will result in the initial
date being printer for either function throughout the following week. Selecting
option 2 returns the user to the STOPPED mode.
MONTH FORMAT
1=NUMERIC
2=LETTERS
DATE FORMAT
D=DAY M=MONTH
=YEAR
jjyy
DATE FORMAT
D=DAY M=MONTH
=YEAR
ddmmmyy
WEEKLY DATE
1=ENABLE
2=DISABLE
To Next Page
Loading...