Digital Design EVOLUTION II - Page 73

10 EVOLUTION 1 SYSTEM MANUAL Issue Issue 1.1 20 Dec 2006
'>' 0x3E Head Align (Range 0 - 16) 'O' on keyboard
(EV II only)
Q. ESC|STX|Address|`>`|SOH|EOT
R. ESC|STX|Address|`>`|`x`|`y'|EOT
D. ESC|STX|Address|`>`|`x`|`y`|EOT
X. ESC|STX|Address|`>`|ACK|EOT
'4' 0x34 Sequence Number Rollover Value
(EV II, EV SC AND EV1 with version 2.09 and OP2 or 3)
Q. ESC|STX|Address|`4`|SOH|EOT
R. ESC|STX|Address|`4`|{#########}|CR|EOT
where ######### = rollover value in ascii
D. ESC|STX|Address|`4`|{#########}|CR|EOT
X. ESC|STX|Address|`4`|ACK|EOT
'[' 0x5b DATE_ROLLOVER
(EV II, EV CS AND EV1 with version 2.09 and OP2 or 3)
Q. ESC|STX|Address|`[`|SOH|EOT
R. ESC|STX|Address|`[`|`x`|`y`|`x1`|`y1`|EOT
Where:
|`x`|`y`| = Time of Day Hours
|`x1`|`y1`| = Time of Day Minutes
D. ESC|STX|Address|`[`|`x`|`y`|`x1`|`y1`|EOT
X. ESC|STX|Address|`[`|ACK|EOT
‘3’ 0X31 Days until Expiration (max 999)
(EV II, EV SC AND EVI WITH OP3)
Q. ESC|STX|Address|`3`|SOH|EOT
R. ESC|STX|Address|`3`|`aaaa`|EOT
Where: each set of 2 ASCII characters represent the upper and
lower nibble of a packed BCD byte
D. ESC|STX|Address|`3`|aaaa`|EOT
Where: each set of 2 ASCII characters represent the upper and
lower nibble of a packed BCD byte
X. ESC|STX|Address|`3`|ACK|EOT
'r' 0x52 Remaining Ink (0 to 99%)
(EV I, EV II, EV SC)
Q. ESC|STX|Address|`R` |SOH|EOT
R. ESC|STX|Address|`R`|`x`|`y`|EOT