Control panel and indicators
Some of the controls from the remote control are duplicated on the projector control panel, as shown
on the right.
The SOURCE and AUTO buttons have the same function as the INPUT and AUTO SYNC buttons on
the remote control.
The Power indicator will show amber when in standby and green when the projector is on, and will
ash when the projector is warming up or cooling down.
The Warning indicator will ash to show any error situations.
The Lamp indicators will show which lamp is in use, and whether the projector is in Normal or Eco
mode, and will ash to show lamp status.
The chart below shows all possible combinations of indicator lamp color.
Lens
controls
Menu
controls
MENU
RETURNENTER
SOURCE AUTO
POWER WARNING LAMP1 LAMP2
LENS SHIFT
FOCUS ZOOM
+
-
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.
The SOURCE and AUTO buttons
have the same function as the
INPUT and AUTO SYNC buttons on
the remote control.
To Next Page
Loading...
