Digital Projection E-Vision 6800 3D Series - Command Guide; Inputs; Test Patterns; Lens Menu

page 53
Digital Projection E-Vision 6800 3D Series
Remote Communications Guide
COMMAND GUIDE
Rev A January 2015
Command Guide
Protocol commands below are arranged in the order they appear in the OSD. Not all OSD settings have corresponding protocol commands.
<command> <operator> <value>
Inputs
input = ?
0 = HDMI
1 = DVI-D
2 = HDBaseT
3 = VGA
4 = Component 1
5 = Component 2
6 = S-Video
7 = Video
Test Patterns
test.pattern = ?
0 = Off
1 = White
2 = Black
3 = Red
4 = Green
5 = Blue
6 = Crosshatch
7 = Burst
8 = H Ramp
9 = Color Bar
10 = Checkerboard
Lens menu
lens.left (execute)
lens.right (execute)
lens.up (execute)
lens.down (execute)
zoom.in (execute)
zoom.out (execute)
focus.near (execute)
focus.far (execute)
Notes