Image menu continued from previous page
Gamma
Choose a de-gamma curve from 1.0, 1.8, 2.0, 2.2, 2.35 and 2.5.
Used correctly, the Gamma setting can improve contrast while maintaining good
details for blacks and whites.
If excess ambient light washes out the image and it is difcult to see details in dark
areas, lower the Gamma setting to compensate. This improves contrast while
maintaining good details for blacks. Conversely, if the image is washed out and
unnatural, with excessive detail in black areas, increase the setting.
Dynamic Black
Set to On to allow for increased contrast in darker scenes by modulating the light
source.
Saturation, Hue, Sharpness and Noise Reduction
Highlight the setting you wish to edit, and then press ENTER, or the LEFT or
RIGHT arrow button to open the slider.
Use the LEFT and RIGHT arrow buttons to adjust the slider.
Press MENU to close the slider.
Notes
Image >>
Select Item
[Enter] Execute
[RETURN] Back
Brightness
Contrast
Dynamic Black
Saturation
Hue
Image Mode
1.8
2.0
1.0
Gamma
Sharpness
Noise Reduction
Position And Phase
Resync
2.2
2.35
2.5
Noise Reduction
0
To Next Page
Loading...
Need help?
General
