Digital Projection E-Vision 6800 3D Series - Setup Menu; Information Menu

page 57
Digital Projection E-Vision 6800 3D Series
Remote Communications Guide
COMMAND GUIDE
Rev A January 2015
<command> <operator> <value>
Setup menu
orientation = ?
0 = Desktop Front
1 = Ceiling Front
2 = Desktop Rear
3 = Ceiling Rear
lan.ip = ?
A valid IP address in the following format xxx.xxx.xxx.xxx
lan.subnet = ?
A valid subnet mask address in the following format xxx.xxx.xxx.xxx
lan.gateway = ?
A valid LAN gateway address in the following format x.x.x.x
lan.dns = ?
A valid DNS address in the following format x.x.x.x
lan.dhcp = ?
0 = Off, 1 = On
lan.standby = ?
0 = Off, 1 = On
auto.source = ?
0 = Off, 1 = On
auto.poweroff = ?
0 = Off, 1 = On
auto.poweron = ?
0 = Off, 1 = On
startup.logo = ?
0 = Off, 1 = On
blank.screen = ?
0 = Logo, 1 = Blue, 2 = Black
ir.enable = ?
0 = Both, 1 = Front, 2 = Rear
trig.1 = ?
0 = Off, 1 = On
Information menu
model.name ?
serial ?
sw.version ?
act.source ?
pixel.clock ?
h.refresh ?
v.refresh ?
power = ?
0 = Off, 1 = On
Notes