Digital Projection E-Vision 6800 3D Series - Image Menu; Image Mode; Brightness and Contrast

page 27
Digital Projection E-Vision 6800 3D Series
Operating Guide
USING THE PROJECTOR
Rev A January 2015
Image menu
Image Mode
Choose from Bright, Presentation and Video.
Press ENTER to open the list.
Use the UP and DOWN arrow buttons to select an image mode from the list,
then press ENTER to conrm your choice.
Press MENU to return to the main menu.
Brightness and Contrast
Highlight the setting you wish to edit, and then press ENTER, or the LEFT or
RIGHT arrow button to open the slider.
Use the LEFT and RIGHT arrow buttons to adjust the slider.
Press MENU to close the slider.
Notes
Image >>
Select Item
Adjust
[RETURN] Back
Brightness
Contrast
Dynamic Black
Saturation
Hue
Image Mode
100
100
2.2
Off
100
Bright
Gamma
Sharpness
Noise Reduction
Position And Phase
100
15
0
8
Resync Execute
Image >>
Select Item
[Enter] Execute
[RETURN] Back
Brightness
Contrast
Dynamic Black
Saturation
Hue
Image Mode
Presentation
Video
Bright
Gamma
Sharpness
Noise Reduction
Position And Phase
Resync
Brightness
100