DVR Server Manual
The window that is playing back video data will indicate a yellow border to
be different from the live windows.
In the course of the instant playback, you can press Space key to switch
the play/pause status or direction key
→ and ← to play next and previous
frame.
Single-Right-Click the playing back window and select End playback to
stop instant playback.
While instant playback is in processing, if you want to play it again, select
Review playback function. Press Space key to switch the play/pause status or
direction. In pause status, you can press key → and ← to play next and
previous frame. when the screen plays, you can press ↑and ↓to control the
speed of playing, also, in play status you can press → and ← to play in
normal speed and play it again.
3. Alarm popup
Single-Right-Click video image area in main interface and select “Start
alarm popup” after you set “Alarm camera popup interval” in
system setup,
otherwise, it can’t be selected with gray. After that when there is a motion
detection alarm (set in
PTZ & Linkage setup and Motion detection setup) or an
alarm triggered by sensor (set in
Sensor setup), system will display alarm
cameras in sequence. When you want to end this function, you can
Single-Right-Click video image area and select “Pause alarm popup”.
To Next Page
Loading...