DVR Server Manual
【Server Name】Set a name for the new IP camera device for easy
identify.
【IP Address】Input the address of the IP Camera, it is an IP address or IP
alias of the IP camera which is connected through DNS Server.
【Connect Port】Set the port through which connects to IP Camera.
【Login user ID/Login Pass】When the user want to visit IP Camera and
the server has used the function of rights management, login user ID and
password will be checked. If the user has no right to visit that camera, the
connection will be cut down automatically.
【Device Name】Select the corresponding name for the IP camera. Now
our software supports the following types of IP products: NV Series IP/EMDVR,
DG Series EMDVR, DG Series IPC, Dahua Series IP, Sony SNC110/160, ACTi
Series IP, Huviron Series IP, Mobotix M12 Series IP and ArecontVision Series
IP.
【Video Stream type】If you want to use the Record sub stream function
in the IP device, you should select the data stream type Double Stream.
Select the Main-stream or sub-stream for the device, the main-stream and
sub-stream could set in the follow interface:
To Next Page
Loading...