Dinstar FXS - Page 38

Dinstar FXS Voice Gateway User Manual
32
Rx Gain
It is use to control the volume of conversation, Adjust "RX gain" will
affect the end users voice size, the default value is 0.
Its value range from -10 – 10 dB
Primary /Secondary
SIP Display Name
Primary /Secondary SIP account description, Its purpose is so you can
identify the SIP account with a meaningful name
Primary /Secondary
SIPUser ID
User account information, provided by VoIP service provider (ITSP).
Usually in the form of digit similar to phone number or actually a phone
number.
Primary/Secondary
SIP Authenticate ID
SIP service subscriber’s Authenticate ID used for authentication. Can be
identical to or different from SIP User ID.
Primary/Secondary
Authenticate
password
SIP password which registers to soft switch/SIP server
Offhook Auto-dial
Pre-assign an extension or phone number so that automatically dial a
number as soon as you pick up the phone set
Auto-dial Delay
Time
Delay 0-3 seconds to automatically dial a number, 0 means dial number
immediately
DND
Do not disturb, the phone set won’t receive any calls in case it enabled
Caller ID
Enable or disable caller ID for corresponding port
Number for CFU
call forward unconditional, all incoming calls willforward to pre-assigned
number automatically
Number for CFB
Call forward on busy, if the line is busy, the call will forward to pre-
assigned number automatically
Number for CFNRy
Call forward no reply, if the line is not answer the call, the call will
forward to pre-assigned number automatically
Call Waiting
If call waiting enabled, it will send a special tone if another caller tries to
reach you when you are using your telephone