Dinstar FXS - Page 45

Dinstar FXS Voice Gateway User Manual
39
Anonymous Call
Enable anonymous call, “anonymous” will include in SIP
message
Reject Anonymous Call
Enable this function, reject all anonymous call. Disable by
default
# as ending Dial Key
Dial-up, use # as a end descriptor.
# Escape
Escape # key
Value of “Refer To“ refers
to ”Contact”
Its function is to require the receiving party contact with the
third party through the use of supplied in the request in the
address information. “Refer to” field of SIP message fill in
“contact header”.
Third Party Do Not Send 18x
Response
Send 18x response when acting as third party in a attended
transfer
Send BYE when Recv REFER
Response (unattended)
Send BYE to release session after receiving REFER when acting
as
Send New REGISTER when
Recv 423 Response
Update the value of expires header and re-send REGISTER when
receive 423 response
Implicit Subscribe
Accept implicit subscription
CSeq Start with 1
Value of CSeq start with 1
Forbid Invilad m=line in
reINVITE
Forbid invilad m=line in SDP of re-INVITE
RTP Mode in SDP when Call
Holding
Use sendonly or inactive to hold the call
Support Call Waiting of
Huawei IPPBX
Support call waiting of Huawei IPPBX
Accept Orphan 200 OK
Support different to-tag 200 OK in a INVITE session
Domain Query Type
There are two modes option: A QUERY and SRV QUERY. Default
is A QUERY.