ICS-900 Operator’s Manual
96 Doc. 065215-02 9/09
A.8 Column Heater/Thermostat
A.9 Conductivity Detector and Flow Cell
Void Vo lume SRS 300 (4 mm): <50 μL
SRS 300 (2 mm): <15 μL
MMS 300 (4 mm): <50 μL
MMS 300 (2 mm): <15 μL
AMMS ICE 300 (4 mm): <50 μL
AMMS ICE 300 (2 mm): <15 μL
Anion AES: <35 μL
Cation AES: <35 μL
Sequential
Suppression for
Anions
With MMS and CRD 300
Suppressor Wear
Parts
None; peristaltic pump and inline filters not required
Column Heater/
Thermostat
Optional with CTS-10 external heater. Temperature set range of 25
to 85 ºC; minimum 5 ºC above ambient.
Type Bipolar-heated conductivity cell; microprocessor-controlled digital
signal processing over a range of 0 to 10,000 μS/cm
Temperature
Compensation
Preset for accurate reading at 40 ºC
Cell Drive 8 kHz square wave
Auto Offset -9,999 to 9,999 μS
Linearity 1%
Resolution 0.0047 nS/cm
Calibration Factory-calibrated before shipment to the user; calibrated in the
field with memory retention and transfer
To Next Page
Loading...
