Dionex ICS-900 - Wellness Panel Features

5•Service
Doc. 065215-02 9/09 67
3. If the controls on the Wellness panel are disabled, select Connect to
timebase on the Control menu and select the ICS-900 timebase.
5.1.2 Wellness Panel Features
The Wellness panel provides the following features:
System Status • The check box indicates whether the ICS-900 is connected to
Chromeleon or Chromeleon Xpress. When there is no
connection, the check box is clear and the remaining controls
on the Wellness panel are disabled.
• Click the Pump button to turn the pump on and off.
• Click the Log Serial # button to record the ICS-900 serial
number in the Audit Trail.
• The Calibration or Diagnostic box is green while a
calibration or diagnostic procedure is running.
• The current total system Pressure, pump Flow rate, and
electrochemical detector (ECD) conductivity are displayed.
Audit Trail
• The Audit Trail displays an account of every event that occurs
during ICS-900 operation. This includes errors, status
messages, operational events, etc.
Reset
Calibration
Parameters
• Click the View/Reset Cal Values button to open a window
that shows the current calibration values, the previous values,
and the factory-set values. You can reset the current
calibration values to the previous or factory-set values from
the window.