2. Function
The main function of rinsing mixing circuit board is to receive the command from the main control
board, communicate with the main control board, transmit data and alarm command.
Controlling sample&reagent unit includes sample&reagent disk rotation, probe unit running.
Barcode scanning of sample&reagent disk
As shown in figure：
J041: signal port of rinsing mixing optocoupler
J042: drive port of solenoid valve
J045: stirring motor control port.
J048: communication port with cooling board
Solenoid valve：refer to 5.2.1
SV1：cuvette rinsing probe（the second one）control solenoid valve
SV2：cuvette rinsing probe（the third one）control solenoid valve
SV3：cuvette rinsing probe（the fourth one）control solenoid valve
SV4：stirring rod rinsing control solenoid valve
SV7，SV8：cuvette rinsing probe（the first one）control solenoid valve
SV11：cuvette vacuum control solenoid valve
To Next Page
Loading...