Distech Controls ECB-VAVS - CO 2 Elevation Input

14 ECB-VAVS Preloaded Applications
CO
2
Elevation Input
The Allure EC-Smart-Vue with CO
2
sensors and Allure EC-Smart-Air with CO
2
sensors are factory cali-
brated to accurately read CO
2
concentration levels at sea level. The Elevation (AV99) variable adjusts
the CO
2
concentration levels when the sensor is used in locations where the elevation is greater than
500ft (152m) above sea level. The Elevation input of the corresponding ComSensor block in EC- gfx-
Program must be set to the current location’s elevation to obtain the most accurate readings.
Sequence of Operation