Distech Controls ECB-VAVS - Configuring the Preloaded Applications

28 ECB-VAVS Preloaded Applications
Configuring the Preloaded Applications
The VAV’s preloaded applications can easily be configured from within EC- gfx Program. The configu-
ration parameters related to a VAV box setup as well as its input and output settings are accessible
through the
Configuration Assistant
.
To access the
Configuration Assistant
page:
1. In the Nav sidebar, right click the VAV you wish to configure and click Launch Wizard.
Figure10: Launching Wizard from the Nav Sidebar
The
Configuration Assistant
page appears.
Figure11: Configuration Assistant Page in EC-gfxProgram
Using the dc gfxApplications