Distech Controls ECB-VAVS - Configuring the Flow Setpoint Parameters

57ECB-VAVS Preloaded Applications
Configuring the Flow Setpoint Parameters
The flow setpoint parameters of the controller can be set in the Flow Setpoint submenu, which is part
of the Advanced Menu of the Allure EC-Smart-Vue.
How to enter the Flow Setpoint submenu and configure a parameter
The Flow Setpoint submenu has several configurable parameters. To enter this submenu and config-
ure a parameter:
To enter the advanced menus:
1. Hold the Menu button for five seconds:
°F
pm
5 sec
The password field appears.
2. Use the arrow keys to increase or decrease the displayed number until it matches the configured
password.
Screen timeout: 15 s
By default, the password is 9995.
3. Press the Menu button to submit the password.
Screen timeout: 15 s
Upon submitting the correct password, the advanced menu is displayed.
press several times
Screen timeout: 15 s
4. Press the Menu button until the FLOWSP menu appears on the display.
Screen timeout: 30 s
The minimum flow (MIN) parameter appears.
Allure EC-Smart-Vue Screen-by-Screen Guide