Distech Controls ECB-VAVS - Allure EC-Smart-Vue Screen-by-Screen Guide; Adjusting the Setpoints and Display Units

42 ECB-VAVS Preloaded Applications
Allure EC-Smart-Vue Screen-by-Screen Guide
Adjusting the Setpoints and Display Units
When a controller is in occupied or bypass mode, the active setpoint can be adjusted using the Allure
EC-Smart-Vue’s arrow keys. Alternatively, the heating and cooling setpoints can be adjusted from the
sensor’s User menu. The User menu also allows modifying the display units. The User menu is not
password protected.
To enter into the User menu and make changes to the setpoints or display units:
1. Press the Menu button once.
°F
pm
Screen timeout: none
The cooling setpoint starts blinking.
2. Use the arrow keys to increase or decrease the cooling setpoint.
°F
pm
Screen timeout: 3 sec
3. Press the Menu button to submit the new cooling setpoint.
°F
pm
Screen timeout: 3 sec
The heating setpoint starts blinking.
4. Use the arrow keys to increase or decrease the heating setpoint.
°F
pm
Screen timeout: 3 sec
5. Press the Menu button to submit the new heating setpoint.
°F
pm
Screen timeout: 3 sec
Allure EC-Smart-Vue Screen-by-Screen Guide