Distek Evolution 6100 - Modify a Saved Method; Deleting a Method; Copy a Saved Method to a New Name

Chapter 3: Operation
Operation Manual: Evolution Series
3
-
30
Modify a Saved Method
The operator logged in to the system must be part of
the Manager group to modify a method.
The method name of a saved method cannot be
modified. Modifying the method name will create
a new method using the modified name.
1. From the main screen (see Figure 3-4) select either the menu bar option
AUTO (go to step 3) or the AUTO MODE wizard button.
2. Highlight the button OPEN and press ENTER.
3. Highlight the method to be modified from the method list and press ENTER.
4. Highlight the menu bar item OPEN and press ENTER.
5. Make the necessary modification to the method. See Figure 3-24, Figure
3-25 and Figure 3-26.
6. Upon completion of modification highlight SAVE on the menu bar and press
ENTER.
Deleting a Method
The operator logged into the system must be part of the
Manager group to delete a method.
1. From the main screen (see Figure 3-4) select either the menu bar option
AUTO (go to step 3) or the AUTO MODE wizard button.
2. Highlight the button OPEN and press ENTER.
3. Highlight the method to be deleted from the method list and press
ESC/DELETE.
Copy a Saved Method to a New Name
1. From the main screen (see Figure 3-4) select either the menu bar option
AUTO (go to step 3) or the AUTO MODE wizard button.
2. Highlight the button OPEN and press ENTER.
3. Highlight the method to be modified from the method list and press ENTER.
4. Highlight the menu bar item OPEN and press ENTER.
5. Highlight the method name field and press ENTER.
6. A virtual keypad will be displayed (see Figure 3-10). Use the arrow keys to
navigate through the keyboard and press ENTER to select an alphanumeric
value (maximum of 16 characters).