Par CO08=2 continuous insertion with reverse action steps
2= continuous insertion the partialisation steps are all inserted/removed on the basis of the polarity chosen.
In the case of partialisation request due to temperature control, only the requested step is inserted/removed.
The others all remain inserted/removed on the basis of the polarity chosen.
N° 1 compressor with three partialisations. 4 steps are available in the circuit.
Par CO08 = 3 Continuous direct global step insertion
3= continuous insertion the partialisation steps are all inserted/removed on the basis of the polarity chosen.
In the case of partialisation request due to temperature control, only the requested step is inserted/removed.
The others all remain inserted/removed on the basis of the polarity chosen.
N° 1 compressor with three partialisations. 4 steps are available in the circuit.
To Next Page
Loading...