12.3 RS485 SLAVE SERIAL OUTPUT CONNECTION WITH MODBUS PROTOCOL
Using the RS485 SLAVE serial output, it is possible to connect the iPro.CHILL programmable controller to
the Dixell XWEB supervising systems or to applications developed by third party system integrators for
complete control and supervision from local or remote.
Dixell offers a complete range of systems able to satisfy all control and supervision needs, even in the most
complex systems and in systems of all sizes.
XWEB 300 / XWEB500 Monitoring and controlling systems
XWEB 3000 Industrial monitoring and controlling system
XWEB 5000 Monitoring, controlling and supervising system
WARNING: It is important not to connect the serial cable shield to the electric plant earth or to the
GND clamp or short circuit the shields between each other in the presence of pieces of cable.
To Next Page
Loading...