dIXEL IPC400D SERIES - Evaporator Water Pumping Unit Circuit Breaker Alarm

!
USER MANUAL – Release 1.2 of 01/01/2010 Page 178 of 191
Version: 02/03/2010
57.28 EVAPORATOR WATER PUMPING UNIT CIRCUIT BREAKER ALARM
Display label meaning
AtE1 (evaporator n° 1 water pump circuit breaker)
AtE2 (evaporator support n° 2 water pump circuit breaker)
Cause of activation
ID configured as evaporator n° 1 water pump circuit breaker active
ID configured as evaporator n° 2 water pump circuit breaker active
Reset
With ID not active
Reset
Manual. (reset procedure in functions menu)
Icon
flashing
Action
Alarm relay + buzzer activated
Regulators
Alarm
Relay + buzzer activated
Reverse valve
It follows its regulation
Recovery valve
it follows its regulation
Free-cooling on/off valve
it follows its regulation
Auxiliary relay
it follows its regulation
Idle running valve
It follows its regulation
Supply ventilation
Off if no pump is available
Condensation ventilation
Off if no pump is available
Support/boiler/anti-freeze
It follows its regulation
Evaporator water pump
Off if no pump is available
Condenser water pump
It follows its regulation
Compressors
Off if no pump is available
Pump down solenoid valve
Off if no pump is available