dIXEL IPC400D SERIES - Defrost

!
USER MANUAL – Release 1.2 of 01/01/2010 Page 86 of 191
Version: 02/03/2010
16.7.7 Defrost
In this screen it is possible to check the status of the defrost cycle for every circuit present:
By selecting the circuit affected and pressing ENTER, pass to the following screen.
The key allows forcing of the defrost cycle.
16.7.8 Heaters/Liquid line solenoid valve
This menu allows to display the active and/or deactivated heaters and any active and/or deactivated liquid
line solenoid valves (only the resources configured are displayed).