For every day of the week and for both functions, it is possible to manage:
• No time band
• Band 1
• Band 2
• Band 1 and 2
• Band 3
• Band 1 and 3
• Band 2 and 3
• All bands
Warning: Automatic switch-off has priority with respect to Energy saving
Press the ESCkey several times to go back to the main screen.
16.7.3 Compressors
The following information is available for each circuit in this menu:
• Hors worked by each individual compressor
• Number of start-ups for each individual compressor
For each individual compressor it is possible:
• To reset the working hours
• Reset the number of start-ups
• Disable compressor working (e.g. perform maintenance)
To reset the values, position the cursor on the element and press the RESET HOURS or RESET STARTS
key:
The cursor will automatically position itself on the next element, to modify it repeat the operation just
described.
To enable or disable a compressor, position the cursor on the element and press the ENB/DIS key:
The cursor will automatically position itself on the next element, to modify it repeat the operation just
described.
16.7.4 Water pump
The following information is available in this menu:
• Hours worked by each individual pump (evaporator and condenser)
For each individual pump it is possible:
To Next Page
Loading...