dIXEL IPC400D SERIES - IPROEX60 D Expansion Module; Expansion Module LEDs Meaning;Working

!
USER MANUAL – Release 1.2 of 01/01/2010 Page 56 of 191
Version: 02/03/2010
8. IPROEX60D EXPANSION MODULE
The following can be connected to the programmable devices of the iPro.CHILL range: the IPROEX60D
expansion module to ease the increase of I/O available to the user.
Up to 4 expansion modules IPROEX60D can be connected to the iPro.CHILL for increasing the I/O number.
Their address must be between 5 (Expansion module number 1) to 8 (expansion module number 4) and
must be consecutive, that is if 2 modules are configured they must have addresses 5 and 6.
8.1 EXPANSION MODULE LEDS MEANING/WORKING
The following table gives the working mode of the LEDs
LED
MODE
MEANING
PWR ON
On
Module powered
ALARM
On fixed
Indicates the presence of a general alarm situation
TX/RX CANBus
Flashing
Communication active
TX/RX CANBus
Fixed
No communication