dIXEL IPC400D SERIES - IPROEX60 D Expansion Module Wiring Diagrams; IPROEX60 D Expansion Model Hardware Resources

!
USER MANUAL – Release 1.2 of 01/01/2010 Page 57 of 191
Version: 02/03/2010
9. IPROEX60D EXPANSION MODULE WIRING DIAGRAMS
9.1 IPROEX60D EXPANSION MODEL HARDWARE RESOURCES
Power supply
24V Ac/dc
Digital inputs
3 opto-isolated with 10mA alternating current on the contact
Analogue inputs
7 configurables 0÷1V, 0÷5V, 0÷10V, 2÷20 mA, 4÷20mA, NTC, PTC, digital input
Analogue outputs
3 configurables with 0÷10V signal/external relay piloting
Relay outputs
6 5(2) A 250V
Serial outputs
1 CANbus
Dip Switch
4 positions for recognition address
The wiring of the analogue and digital inputs and the analogue outputs of the expansion module takes place
using the same methods as the iPro.CHILL range, to which it is connected.