dIXEL IPC400D SERIES - Compressors Neutral Zone Temperature Control Graphics

!
USER MANUAL – Release 1.2 of 01/01/2010 Page 98 of 191
Version: 02/03/2010
21.3 COMPRESSORS NEUTRAL ZONE TEMPERATURE CONTROL GRAPHICS
Compressors regulator function in cooling mode graphics
If ST12 = 1 the working set point of the second circuit is ST13 and the band is ST19
Compressors regulator working in heating mode graphics
If ST12 = 1 the working set point of the second circuit is ST16 and the band is ST20