16.7.14 Screw compressor
This menu can be used to monitor the working status of the screw compressor in the various circuits.
The Set and Differential values can be modified.
By selecting the desired circuit and pressing ENTER, the following information can be displayed:
16.7.15 Control panel
Your own LCD keyboard can be customised in this menu.
The possible options in this menu are:
• Contrast regulation
• Back light time ON: regulation from 0 to 200 seconds, or always on
• Language selection: Italian " English " Italian
• Information regarding the system: Release software, setting IP address and MODBus node.
To Next Page
Loading...