16.6 CIRC KEY
Using the CIRC key it is possible to monitor the situation of the unit. The information refers to:
• Circuits compressors status; the screen shows the compressors present for each circuit and the
activation status of the compressor (number of partialisations active). If the compressor has no
number on the right, it means that it is at full power.
If unloading should be active, the maximum number of steps active will be displayed.
• Condensation-evaporation probes. The screen shows the condensation and evaporation pressures
of every circuit present.
If the valuer of the parameter SP1 is equal to "0" or "1", the high side is represented with the temperatures.
To Next Page
Loading...