dIXEL IPC400D SERIES - I;O Status

!
USER MANUAL – Release 1.2 of 01/01/2010 Page 87 of 191
Version: 02/03/2010
16.7.9 I/O status
This menu allows to display the status of all inputs and outputs that have been defined.
The I/O units have been divided by groups, as in the screen below:
By pressing the ENTER key, it is possible to enter every I/O unit.
16.7.10 Thermostatic
In this menu it is possible to check the working status of the valve and/or electronic thermostatic valves for
every circuit defined.
Press the ESC key to go back to the main screen.