dIXEL IPC400D SERIES - IPC400 D Series Features

!
USER MANUAL – Release 1.2 of 01/01/2010 Page 13 of 191
Version: 02/03/2010
• Via RS485 slave output with ModBus protocol to Dixell XWEB300D / XWEB500D supervision systems
3. IPC400D SERIES FEATURES
FEATURES
IPC410D
IPC415D
POWER SUPPLY
24 VAC/DC (± 10%)
n
n
RELAY OUTPUTS
10
n
15
n
DIGITAL INPUTS
20 Configurable
20 Configurable
PROBE INPUTS
10 Configurable
10 Configurable
PROPORTIONAL OUTPUTS
outputs for condensing fan modules (PWM signal)
2 Configurable
2 Configurable
0÷10V analogue outputs for free-cooling management
and heat recovery or ON/OFF for driving external relay
4
4
FURTHER CONNECTIONS
1/ RS485 Master with Modbus Rtu protocol
1
1
1/ RS485 Slave with Modbus Rtu protocol
1
1
VGIPC keyboard output (up to 2 remote terminals with
probe on board)
Up to 2
Up to 2
Network outputs (Internet / intranet)
Opt. (enabling)
Opt. (enabling)
CANbus output
n
n
USB port (host)
n
n
OTHER
Buzzer
n
n
Internal real time clock RTC
n
n
! Config. = configurable from parameter
! Opt = optional
! n = standard