dji INSPIRE 3 - Page 12

DJI Inspire 3 User Manual
12
©
2023 DJI All Rights Reserved.
• Make sure to hold the gimbal rmly when removing or mounting it.
• Make sure that the gimbal connector on the aircraft is correctly positioned when
mounting, otherwise the gimbal camera will not mount.
• To remove the gimbal camera, hold down the gimbal camera detach button on the
aircraft and rotate the gimbal camera to detach it.
• DO NOT disassemble the gimbal without authorization.
• Precision elements in the gimbal may be damaged by a collision or impact, which
may cause the gimbal to function abnormally. Make sure to protect the gimbal from
damage.
• The gimbal dampers and the connector between the gimbal and the aircraft are
delicate. Keep them away from damage. Contact DJI Support or a DJI authorized dealer
for further assistance if necessary. Read the maintenance manual for more information
on how to replace the gimbal damper.
5. Insert the DJI PROSSD into the aircraft. The indicator on the DJI PROSSD turns on, indicating
that it is correctly inserted.
• DO NOT expose the camera lens to a strong energy source such as the sun, lava, or
laser beams. Otherwise, it will cause damage to camera.
4. Remove the protective cover on the aircraft and install the gimbal camera to the aircraft.
2
1
3
1
1
3
4
2
2
2