dji INSPIRE 3 - Page 83

DJI Inspire 3 User Manual
©
2023 DJI All Rights Reserved.
83
connected remote controller does not choose either option within a specied time period,
the aircraft will also activate the failsafe action.
5. When the disconnected remote controller reconnects to the aircraft during the ight, if the
aircraft control is not taken over by the connected remote controller, the aircraft control will
be resumed to the remote controller before disconnection by default.
6. Only the remote controller with control of the gimbal camera can be used to adjust relevant
settings for the gimbal and camera, and to download or playback media les.
7. Under normal circumstances, the pilots of both remote controllers can adjust ight-related
settings, such as for the flight controller system, vision systems, batteries, and video
transmission. However, if aircraft control is locked, only the remote controller with aircraft
control can be used to adjust these settings.
8. Other non-ight-related operations can be performed using either remote controller.
9. The pilot of remote controller B cannot adjust settings for custom network RTK.
10. Remote controller A can be used to update the firmware of all modules at once when
connected with the aircraft, but remote controller B can only be used to update the
rmware of remote controller B.
11. Uploading Logs Using DJI Pilot 2: the operator can upload the logs of both the aircraft
and remote controller A through remote controller A, and can upload the logs of remote
controller B through remote controller B.
12. Remote controller B cannot be used to update the Fly Safe database.