dji INSPIRE 3 - Page 94

DJI Inspire 3 User Manual
94
©
2023 DJI All Rights Reserved.
8. Health Management System
Displays the health status of the aircraft, remote controller, and payload.
a
b
c
de
a. If the current remote controller is not connected to the aircraft, a picture of the remote
controller will be displayed. Tap to link the remote controller to the aircraft, the aircraft
model and picture will be displayed after it is connected.
b. If the payload is abnormal, the payload name will appear in yellow or red. Tap to view
the error information of the payload.
c. The current remote controller role is displayed as A or B. Tap to view the information of
the remote controller or switch the remote controller role.
d. The health status of the aircraft and the remote controller is displayed here. Tap to
enter the Health Management System view. Read the Health Management System (HMS)
section for more details.
e. The maintenance information of the current aircraft is displayed here. If the aircraft has
DJI Care Pro, its validity period will also be shown. Tap to view the device information,
including cycle count, ight duration, ight history, activation time, ight mileage, etc.
9. Firmware Update Shortcut
If an update is necessary, a prompt will appear notifying the user that new firmware is
available or a consistent rmware update is needed for the aircraft and remote controller.
Inconsistent firmware versions will affect flight safety. The app will prioritize consistent
rmware updates. Tap the prompt to enter the rmware update page.
• A consistent firmware update is required when the firmware versions of some
modules of the aircraft are inconsistent with the compatible version of the system.
In a typical consistent firmware update situation, the aircraft, remote controller,
and the batteries that are installed will be updated to the latest version. Any other
batteries need to be updated separately. When these batteries are used, a prompt
will appear requiring a consistent rmware update to ensure ight safety.
10. Enter Camera View
Tap to enter FPV camera view or gimbal camera view. Refer to the Gimbal Camera View and
FPV Camera View sections for more details.