Simga2N Traction Advanced Manual– V1.3 Page 133 (166) ©2021 DMC GmbH Herten Germany
M8.2-8 Digital output 3 holding voltage ”Do3HoldV”
It sets the Digital Output 3 holding voltage applied when the line contactor is closed and 1 s of time is elapsed.
If this parameter is set to its maximum value (i.e. the nominal battery voltage for each Simga2NController size),
the actual battery voltage will be applied, even if it is higher than the nominal battery voltage.
Example:
Nominal battery voltage = 48V, Parameter set to 48V, Actual battery voltage = 52V. The applied voltage is 52V.
Nominal battery voltage = 48V, Parameter set to 47V, Actual battery voltage = 52V. The applied voltage is 47V.
To Next Page
Loading...
