Simga2N Traction Advanced Manual– V1.3 Page 20 (166) ©2021 DMC GmbH Herten Germany
Pin A34 Thermistor AD4 i/p
This pin has to be connected to the anode of KTY84-130 thermistor or to one side of and RTD 1000 ohm 0°C or
25°C thermal sensor. The motor thermal sensor type can be selected by parameter “M5.2-1 Motor temperature
sensor type “MtempTyp””.
Pin A35 Thermistor 0V
This pin has to be connected to the cathode (black lined side) of KTY84-130 thermistor or Pt 1000 ohm 0°C
thermal sensor. The motor thermal sensor type can be selected by parameter “M5.2-1 Motor temperature
sensor type “MtempTyp””.
To Next Page
Loading...
