Dormakaba ES 250 PRO - Mounting; Safety during mounting; Mounting requirements

10
WN 059677 45532 - 11/2023
ES 250 PRO/ES 250 PRO FST
ES 400 PRO/ES 400 PRO FST
Mounting instructions
4 Mounting
This manual describes the mounting of a 2-leaf unit. The same procedure should be
carried out for a 1-leaf unit.
4.1 Safety during mounting
WARNING
Danger of injury from falling objects!
Falling parts or tools
can cause injury.
• Secure objects against falling.
• Do not leave objects carelessly lying around.
• Secure workplace against unauthorized entry.
WARNING
Incorrect mounting is dangerous!
Mounting the door unit incorrectly can result in dangerous situations.
• Do not mount the door unit in rooms where chemicals (e.g. chlorine)
are used.
• Do not make unauthorized changes, additions, or modifications to the
door unit.
• Only install intact parts.
• Only use materials intended for mounting the door unit.
ATTENTION
Danger due to contamination!
Drilling chips or similar contamination may damage the rollers.
• Keep the operator and running profile clean at all times.
4.2 Requirements for mounting
4.2.1 Temperature range
Note
Before starting mounting, make sure that the location of use meets the
specifications for operating temperature.