59
WN 059677 45532 - 11/2023
ES 250 PRO/ES 250 PRO FST
ES 400 PRO/ES 400 PRO FST
Mounting instructions
7 Commissioning
7.1 Requirements
• The operator is mounted correctly, mechanically and electrically.
• The area of movement of the door leaf is free from obstacles.
• The door is in the half-open position.
• The connections for the safety sensors on the extension module SiAK (optional)
are bridged.
• The operating mode switch is in Off mode.
• An emergency stop or emergency open button, if present, is not pressed.
7.2 Safety during commissioning
CAUTION
Danger of injury from moving parts!
During commissioning there is a risk of crushing in the operator and risk
of being hit by the door leaves.
• During commissioning, do not touch the moving parts in the operator.
• Before commencing commissioning, ensure that nobody is in the area
of movement of the door leaves.
7.3 Commission the operator
WARNING
Danger of death due to electric current!
Touching live parts will result in death or serious injury from electric
shock.
• Work on electrical units must only be carried out by qualified
electricians.
• Do not touch live parts or cables.
• Suitable personal protective equipment must always be worn when
working with the product.
To Next Page
Loading...
