Dormakaba ES 250 PRO - Safety; Intended and improper use; Risk assessment and vulnerable people; Basic warnings

6
WN 059677 45532 - 11/2023
ES 250 PRO/ES 250 PRO FST
ES 400 PRO/ES 400 PRO FST
Mounting instructions
2 Safety
2.1 Intended use
ESPROLINE sliding door operators are suitable for use in dry environments. The
escape route variant is suitable for use on escape and emergency routes.
2.2 Improper use
The use of control elements, settings or procedures not described in this
documentation may cause electric shocks, hazards posed by electrical voltages/
currents, and/or hazards posed by mechanical processes.
2.3 Reasonably foreseeable misuse
Any mounting above and beyond the correct mounting is considered to be incorrect
mounting.
2.4 Risk assessment
The assembling technician ensures that the results of the risk assessment are
complied with. The assembling technician carries out their own inspection and
flags up any unresolved hazards.
2.4.1 Special protection requirements with regard to particularly
vulnerable people
Insofar as the risk assessment results in an unacceptable impact for a door user, in
terms of a health risk or a risk of injury, protection must be added in the form of a
safety device (connecting a safety sensor or mounting a protective panel). This is
to be taken into special consideration if particularly vulnerable persons (e.g.
children, elderly people or disabled people) use the door area.
2.5 Basic warnings
WARNING
Risk of injury due to heat generation, explosion, and fire
Improper handling of batteries (e.g. overheating, destruction, recharging,
use of the battery in other products) can cause heat generation,
explosion, and fire. This poses a risk of injury.
• Only use the battery types recommended and approved by
dormakaba.
• Observe warnings on the batteries.
• Only use batteries as intended.
• Keep out of reach of children.