Dormakaba ES 250 PRO - 4.8 Mount the floor guides

26
WN 059677 45532 - 11/2023
ES 250 PRO/ES 250 PRO FST
ES 400 PRO/ES 400 PRO FST
Mounting instructions
4. Guide the door leaves with the carriers above the track rail into the operator
profile.
Fig.32
4.
5.
6.
5. Swivel the door leaves under the operator.
6. Place the track rollers on the track profile.
7. Adjust the counter roller on all carriers so that the wheel assembly is 0.5mm
away from the operator profile.
Fig.33
7.
7.
8.
0.5mm
8. Tighten the screws.
9. Check that the door leaves move easily.
4.8 Mount the floor guides
1. Mount the floor guides according to the accompanying manual.